General Specifications
With the powerful ARM processor, DMX data up to 40FPS coming over the ethernet network is transferred to the output channels without any loss in FPS value.
The usage of the “DMX CC 4s” in the housing of the luminaires are achieved by its slim type mechanical case. With the slim body, the mounting and cabling also becomes easier.
“DMX CC 4s” can be used as a DMX master controller. The mode selection, scenerio selection and scenerio speed are configured by user via buttons and display on the device. In master mode, the decoder also drives the LEDs connected to its output according to its DMX address.
“DMX CC 4s” supports remote device management (RDM) protocol. This feature enables user to set/read the address of “DMX CC 4s” using an RDM controller, without reaching the device, using DMX cable connected to DMX input of the decoder.
“DMX CC 4s” has three drive current options which are 350, 500 and 700 ma. The selection of drive current is done in manufacturing process so it should be determined in the order.
DMX Address, device operation mode, scenerio type, scenerio speed, gamma correction values can be set easily via user buttons and display located on top of the decoder.
“DMX CC 4s” applies gamma correction to the DMX data and drives the LEDs according to gamma corrected color levels. This unique feature makes the decoders suitable for facade lighting applications. The gamma correction value can be set by user via buttons and display on the device.
Connection Diagram
