General Specifications
With the powerful ARM processor, DMX data up to 40FPS coming over the ethernet network is transferred to the output channels without any loss in FPS value.
“DMX CV 4ps” supports remote device management (RDM) protocol. This feature enables user to set/read the address of “DMX CV 4ps” using an RDM controller, without reaching the device, using DMX cable connected to DMX input of the decoder.
The usage of the “DMX CV 4ps” in the housing of the luminaires are achieved by its slim type plastic case. With the slim body, the mounting and cabling also becomes easier even if the decoder is mounted outside luminaire.
DMX Address, device operation mode, scenerio type, scenerio speed, gamma correction values can be set easily via user buttons and display located on top of the decoder.
“DMX CV 4ps” has 12V-24V wide input voltage range. This feature makes DMX CV a proper solution to drive many types LED luminaires in the market.
“DMX CV 4ps” can be used as a DMX master controller. The mode selection, scenerio selection and scenerio speed are configured by user via buttons and display on the device. In master mode, the decoder also drives the LEDs connected to its output according to its DMX address.
“DMX CV 4ps” applies gamma correction to the DMX data and drives the LEDs according to gamma corrected color levels. This unique feature makes the decoders suitable for facade lighting applications. The gamma correction value can be set by user via buttons and display on the device.
Connection Diagram
